Heavy Duty 3 Core Cable for Micro Inverters and Solar Systems TUV Certified

Heavy Duty 3 Core Cable for Micro Inverters and Solar Systems TUV Certified. Technical data: Mains cable with BC01 socket and plug H07RN-F 3 x 1.5 mm², rubber cable (2-pin + PE). Cable diameter: 10 mm AC cable 3-pin (L/N/PE) AC connection of the micro inverter to a socket. Areas of application: For balcony solar systems and pitched roof installation.

Tip: The electricity generated with the solar modules can be fed directly into the household power grid using the connection cable from almost any single-phase micro-inverter. HIGH QUALITY: High quality rubber hose, soft, thick, UV resistant, extremely durable.

Different lengths, 2-3-5-6-10 m selectable. The H07RN-F 3 x 1.5mm² rubber tube cable is suitable for use. Benefits: They are oil, UV and ozone resistant for years of service and can withstand outdoor weather conditions and are suitable for temperature ranges from -40?

Length: 2 meter, 3 meter, 5 meter, 6 meter, 10 meter Number of pin cores: 3 cores Wire core material: oxygen-free copper Number of cores: 3 cores Number of shares: 30 shares Nominal section: 1.5mm² Sheath material: environmentally friendly PVC rubber Sheath color: black Sheath thicknes: 0.8mm Insulation material: rubber Insulation Color: Black Insulation thicknes: 0.8mm Working temperature: -40°C-90°C Interface type: plug. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Please allow slight manual measurement deviation for the data. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions.

---