Core Heavy Duty

13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330

13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330
13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330
13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330
13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330
13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330
13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330
13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330
13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330
13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330
13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330

13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330
LVP-230 is a second-hand product, as shown in the picture. You are professional, you can use it. If the cutting height is less than 8 mm, follow the steps below. The first step is to remove the blade and see if there is aluminum scrap in the sipe and then reinstall it. Be careful with sharp blades. The second step, Reconnect the workbench to the head of the cutter. If you tighten the bolts at first, it is possible that the head of the cutter and the work table are misaligned.

Reloading bolts at the next step cannot be adjusted. In the third step, attach the handle to the eccentric base. The handle is locked on the blade base.

Don't worry, press down on the handle, hook the hook on the blade base, and tighten the high head bolt. Look again, is the base under the blade adjusted? Design for cutting LVP, WPC, LVT, VCT, PVC, SPC, Vinyl Plank Flooring.

Can't cut Laminate, Engineered floor or Wood. So don't try to cut the floor that is not in range. No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. Straight cut, Angle cut; " L & " cut and Lengthwise cut(Solve the installation of wall and corner).

0-45° Angle Cutting, Translational cutting. Easy to use and to carry around. 3mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.

When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service life! Replacement Blade, please wait for the link.

17.2 x 15.8 x 6.2 inches. Pls confirm address before purchasing. The item "13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330" is in sale since Tuesday, May 18, 2021. This item is in the category "Home & Garden\Tools & Workshop Equipment\Hand Tools\Cutting Tools". The seller is "ntnh1399" and is located in Azusa, California.

This item can be shipped to United States.

  • Model: LC-330
  • Blade Material: HSS
  • Custom Bundle: No
  • Item Height: 6.2 inches
  • Item Width: 15.8 inches
  • Material: Aluminum
  • Number of Pieces: 1
  • Type: Vinyl Floor Cutter
  • Blade Width: 1.38 in
  • Color: Black
  • MPN: CutTool Ltd.
  • Item Length: 17.2 inches
  • Brand: MANTISTOL
  • Manufacturer Warranty: 1 year
  • Item Diameter: 13 inches


13 Heavy Duty Vinyl Floor Cutter For WPC LVT VCT Rigid Core Vinyl Plank LC-330